Ruční zvedání a otáčení laboratorního tlakového reaktoru
Ruční zvedání a otáčení laboratorního tlakového reaktoru；SS316, ；100bar；350℃；Zvedací a překlápěcí zařízení；Pohon magnetické spojky Náš tlakový reaktor by mohl sloužit širokému spektru průmyslových společností, jako je ochrana životního prostředí v ropě, chemickém průmyslu, medicíně, barvivech, hornictví a metalurgii, vědeckovýzkumné ústavy, vysoké školy (chemické, polymerní, materiálové inženýrství, organické a anorganické chemikálie). Rozsah tlaku 0,1-50MPa, rozsah objemu 0,1L-50 000L. Nádoba vysokotlakého reaktoru | vysokotlaký autoklávový reaktor | laboratorní mini autoklávový reaktor | Reakční autokláv
- HXCHEM
- Čína
- 45 dní po zaplacení
- 40 sad/měsíc
Podrobnosti
Manual lifting and rotate laboratory pressure reactor
Introduction
This serious is equipped with lift and flip device, which makes it easier to discharge and clean the inner. Lifting device is easy to operate and use, turn the handwheel to lift square iron and kettle cover, rotate the kettle body to the right position by turning handle to discharge the material. The self-tuning function of the temperature controller makes the temperature control more precise.It is mainly used for lab or pilot experiment.
lab reactor homogenizer | lab scale reactor | small scale lab reactors | Lifting and rotate lab pressure reactors
Lab stirred autoclaves | Lab reactor system | High pressure laboratory reactor
2L pressure reactor standard specification
Model: GSHK-2
Volume: 2 liters
Material: SS316,
Maximum pressure: 100bar
Maximum temperature: 350℃
Inner diameter: 114mm， 240mm height
Heating method: Electric heating unite（1.5kW）
Cooling method: Internal cooling spiral coils
Stirring type: Top magnetic coupling drive ,0-1500rpm（150W）Propeller
Seal type:Hard sealing surface
Control system:PID control; Temp. & stirring speed display & control
Product Features
Standard specfications
GSH pressure reactor standard specification table.
| Model No. | GSH-0.1 | GSH-0.25 | GSH-0.5 | GSH-1 | GSH-2 | GSH-5 |
| Nominal Capacity | 100ml | 250ml | 500ml | 1liters | 2liters | 5liters |
| Max Working Pressure | Standard 100bar; Max pressure up to 350bar | |||||
| Working Temperature | Standard 350°C；Up to 500°C | |||||
| Stirring Speed | 0-1500rpm | |||||
| Motor Power | 150W | 150W | 150W | 0.2KW | 0.2KW | 0.6KW |
| Heating Power | 1KW | 1KW | 1KW | 2KW | 2KW | 4KW |
| Closure | Flange bolts closure/ Clamp closure | |||||
Lifting & lowering (Optional) | Cover lid lifting, Vessel fixed Cover lid manual lifting, Vessel rotation Vessel lifting & lowering, vessel rotation Manual; Electric driven; Pneumatic; Hydraulic (Driven method) | |||||
| Material | SS304,SS316 or other alloys(Titanium, hastelloy, Inconel, Nickel, etc) | |||||
| Heating Method | Standard Electric heating ( Jacket heating, far infrared heating optional ) | |||||
| Cooling | Internal spiral coils（optional） | |||||
| Charging Method | Up discharge by pressure or discharge by bottom valve | |||||
| Stirring type | Propeller, paddle type, turbine, anchor type, gas induction, helix type, etc. | |||||
| Control panel | Temp.display and control, accuracy+ 1℃, Stirring speed display & control Touch screen program control(Optional) | |||||
| Standard fittings | Pressure Gage, Thermocouple, Central stirring port Liquid inlet/ Sampling port with needle valve & dip tube and gas inlet with needle valve Safety Rupture Disc: Internal cooling Coil(Optional); Solid feeding plug(Optional) | |||||
Typical Applications
